This Section is very much 'a work in progress'. Its intended to be a database of wheels which have been fitted to various Triumphs over the years. Once the data is more complete, this section will be adapted to provide specific sizing and fitting information for the different body shells.

NOTE 26th July: The database is still lacking wheel weights. Can you help?

#1  LeMans reproduction
Click me	Manufacturer: Jigsaw / Compomotive Wheels	Bolt Pattern / Drilling: 3¾" (95.25mm)
	Size Data: 5½j x 13"	Backspace / Offset: 100mm / 17mm
	Weight: Unknown	Material: Alloy
	First Production Date: 2004	In Production: Yes
	Notes: Jigsaw recommend 185/60x13 tyres. Only available in Old English White (BLVC250). These repros aren't made from Magnesium Alloy like the originals, but they are reported to be almost as light.
#2  Oval Hole Steels - Spitfire mk4/1500
Click me	Manufacturer: Dunlop	Bolt Pattern / Drilling: 3¾" (95.25mm)
	Size Data: 4½j x 13"	Backspace / Offset: 83mm / 13mm
	Weight: 6.76kg (14.9lbs)	Material: Steel
	First Production Date: Unknown	In Production: Nope
	Notes: Always available in various conditions on eBay. Thanks to Kevin Rochfort for supplying very accurate rim weights.
#3  Nine Slot Steels - Toledo Dolomite
Click me	Manufacturer:	Bolt Pattern / Drilling: 3¾" (95.25mm)
	Size Data: 4½j x 13	Backspace / Offset: 83mm / 13mm
	Weight: Unknown	Material: Steel
	First Production Date: Unknown	In Production: Unknown
	Notes: Do you know the backspace for this wheel?
#4  Eight Spoke Alloys - Sprint
Click me	Manufacturer:	Bolt Pattern / Drilling: 3¾" (95.25mm)
	Size Data: 5½j x 13	Backspace / Offset: 118mm / 35mm
	Weight: Unknown	Material: Alloy
	First Production Date: Unknown	In Production: Remanufactures
	Notes: Still need a backspace figure, anyone?
#5  Five Spoke Alloys - Stag
Click me	Manufacturer: GKN	Bolt Pattern / Drilling: 4½" (114.3mm)
	Size Data: 5½J x 14"	Backspace / Offset: 111mm / 28mm
	Weight: Unknown	Material: Alloy
	First Production Date: Unknown	In Production: Yep
	Notes: First produced by GKN, then K N Wheels for about 18 years using original tooling. Now produced by Specialist Car Products who have them made in China. (Many thanks to Adrian from K N Wheels for all the info)
#6  Mk2 / Ribster
Click me	Manufacturer: Cosmic	Bolt Pattern / Drilling: 3¾" (95.25mm)
	Size Data: 6J x 13"	Backspace / Offset: Unknown / Unknown
	Weight: Unknown	Material: Alloy
	First Production Date: Unknown	In Production: Unknown
#7  Minator
Click me	Manufacturer: KN Wheels	Bolt Pattern / Drilling: 3¾" (95.25mm)
	Size Data: 5½J x 13"	Backspace / Offset: 108mm / 25mm
	Weight: Unknown	Material: Alloy
	First Production Date: Unknown	In Production: Very
	Notes: These 'Minilite' type alloys are still available in a wide variety of sizes.
#8  Slot Mag
Click me	Manufacturer: Wolfrace	Bolt Pattern / Drilling: 4½" (114.3mm)
	Size Data: 6J x 14"	Backspace / Offset: Unknown / Unknown
	Weight: Unknown	Material: Alloy
	First Production Date: Unknown	In Production: Unknown
	Notes: Note the red detailing, this is not standard, but seems to be the trend. Looks good yes?
#9  Supa-Slot
Click me	Manufacturer: AllyCat	Bolt Pattern / Drilling: 3¾" (95.25mm)
	Size Data: 5½J x 13"	Backspace / Offset: Unknown / Unknown
	Weight: Unknown	Material: Alloy
	First Production Date: Unknown	In Production: Yep
	Notes: These are copies of Wolfrace's first wheel, the Slot Mag. Currently available from Rimmer Bros (see links section). Adrian from K N Wheels says these were also produced by Two Gates Wheels at some point.
#10  Marina TC Rim
Click me	Manufacturer:	Bolt Pattern / Drilling: 3¾" (95.25mm)
	Size Data: 5½J x 13"	Backspace / Offset: Unknown / Unknown
	Weight: Unknown	Material: Steel
	First Production Date: Unknown	In Production: No
	Notes: These rims were supplied on the Marina 1800 TC saloon. Thanks to Van Hamlin for identifying these, he says that the standard Marina steels also fit.
#11  CX
Click me	Manufacturer: Compomotive	Bolt Pattern / Drilling: 3¾" (95.25mm)
	Size Data: 5½J x 13	Backspace / Offset: 64mm / -18mm
	Weight: Unknown	Material: Alloy
	First Production Date: Unknown	In Production: Unknown
	Notes: Thanks very much to Paul Mason for supplying info on this wheel. The Backspace figure was worked out based on a common rim-edge width of 12mm, so might not be totally accurate.
#12  Unknown
Click me	Manufacturer: Unknown	Bolt Pattern / Drilling: 4½" (114.3mm)
	Size Data: Unknown	Backspace / Offset: Unknown / Unknown
	Weight: Unknown	Material: Alloy
	First Production Date: Unknown	In Production: Unknown
	Notes: This was spotted at Stafford International. Another TSSC member says it was on a left hand drive Triumph 2000 Mk1, possibly Belgian owned. Do you have ANY more info?
#13  TR7 Alloys
Click me	Manufacturer:	Bolt Pattern / Drilling: 3¾" (95.25mm)
	Size Data: 5.5J x 13"	Backspace / Offset: 107mm / 25mm
	Weight: Unknown	Material: Alloy
	First Production Date: Unknown	In Production: Unknown
	Notes: Backspace calculated from Offset, so don't rely on it. Adrian from K N Wheels mentions that they produced this rim for quite some time, but were not the initial manufacturer.
#14  DTM
Click me	Manufacturer: Team Dynamics	Bolt Pattern / Drilling: 3¾" (95.25mm)
	Size Data: 5.5j x 13"	Backspace / Offset: Unknown / Unknown
	Weight: Unknown	Material: Alloy
	First Production Date: Unknown	In Production: In-Stock some places
	Notes: Spotted on a spit at Stafford... (Editor fights the urge to comment)
#15  Star 6
Click me	Manufacturer: K N Wheels	Bolt Pattern / Drilling: 3¾" (95.25mm)
	Size Data: 5.5j x 13"	Backspace / Offset: Unknown / Unknown
	Weight: Unknown	Material: Alloy
	First Production Date: Unknown	In Production: Unknown
	Notes: Saw these on a GT6 at Stoneleigh. The owner says they are direct swap for standard rims. Very rare in UK, especially in a Triumph PDC. Adrian from K N says they were first produced in the early 70's.
#16  8 Spokes
Click me	Manufacturer: Weller	Bolt Pattern / Drilling: 3¾" (95.25mm)
	Size Data: 5.5j x 13"	Backspace / Offset: Unknown / Unknown
	Weight: Unknown	Material: Steel
	First Production Date: Unknown	In Production: Unknown
	Notes: Ignore the 100+ caps in the photo, these were taken from some RimStock wheels.
#17  Rallye
Click me	Manufacturer: Two Gates Wheels / AllyCat	Bolt Pattern / Drilling: 3¾" (95.25mm)
	Size Data: 6j x 14"	Backspace / Offset: Unknown / Unknown
	Weight: Unknown	Material: Alloy
	First Production Date: Unknown	In Production: Yep
	Notes: 6x14" versions in a TR7 suitable offset are available in black gold and silver from Rimmer Bros. Adrian from K N Wheels has informed us that these wheels were produced by Two Gates Wheels [presumably before AllyCat who produce them now], and that a 7x13" version is still available from SL Corse Ltd.
#18  Gemini
Click me	Manufacturer: Goodyear	Bolt Pattern / Drilling: 3¾" (95.25mm)
	Size Data: 5.5j x 13"	Backspace / Offset: Unknown / Unknown
	Weight: Unknown	Material: Alloy
	First Production Date: Unknown	In Production: Unknown
	Notes: Thanks to '2Toledos' from the Club Triumph forum for providing the photo. These rims are stamped 'GoodYear' but manufactured by K N Wheels.
#19  4 Spoke Classic
Click me	Manufacturer: Revolution Wheels	Bolt Pattern / Drilling: 3¾" (95.25mm)
	Size Data: 5.5j x 13"	Backspace / Offset: Unknown / Unknown
	Weight: Unknown	Material: Alloy
	First Production Date: Unknown	In Production: Yes
	Notes: Several different versions available (Road, Race, Rally) in theory, but some only to special order.
#20  5 Spoke Classic
Click me	Manufacturer: Revolution Wheels	Bolt Pattern / Drilling: 3¾" (95.25mm)
	Size Data: 6j x 14"	Backspace / Offset: Unknown / Unknown
	Weight: Unknown	Material: Alloy
	First Production Date: Unknown	In Production: No
	Notes: Roger Hoogman who owns these wheels says he believes they were a special order item. Revolution didn't make 14" 5-spokes in a triumph drilling.
#21  Mamba
Click me	Manufacturer: Telcast	Bolt Pattern / Drilling: 3¾" (95.25mm)
	Size Data: 5½j x 13"	Backspace / Offset: Unknown / Unknown
	Weight: Unknown	Material: Alloy
	First Production Date: Unknown	In Production: No
	Notes: Thanks goes to Adrian from K N Wheels for the name and manufacturer info. He says that Telcast also produced wheels for the Alley Cat (AllyCat?) brand.
#22  Octavo
Click me	Manufacturer: 100+	Bolt Pattern / Drilling: 3¾" (95.25mm)
	Size Data: 5½j x 13"	Backspace / Offset: Unknown / Unknown
	Weight: Unknown	Material: Alloy
	First Production Date: Unknown	In Production: No
	Notes: Thanks to Mark Steinson for supplying the image and info for this rim.
#23  Mercury
Click me	Manufacturer: KN Wheels	Bolt Pattern / Drilling: 4½" (114.3mm)
	Size Data: 6j x 13"	Backspace / Offset: Unknown / Unknown
	Weight: Unknown	Material: Alloy
	First Production Date: Unknown	In Production: Nope
	Notes: Another wheel spotted by Bill Davies (www.rarebits4classics.co.uk) on eBay.
#24  Europa S2 Alloy
Click me	Manufacturer: Dunlop	Bolt Pattern / Drilling: 3¾" (95.25mm)
	Size Data: 5½J x 13	Backspace / Offset: 102mm / 20mm
	Weight: Unknown	Material: Alloy
	First Production Date: Unknown	In Production: Nope
	Notes: Seen on eBay by Jon Morton.
#25  TR7 Steel
Click me	Manufacturer: Dunlop	Bolt Pattern / Drilling: 3¾" (95.25mm)
	Size Data: 5½j x 13"	Backspace / Offset: 102mm / 24mm
	Weight: 6.5kg approx.	Material: Steel
	First Production Date: Unknown	In Production: Nope
	Notes: These are Hubcentric wheels (see 'Wheels Dimension Info' section for an explanation) from a TR7.
#26  TF?
Click me	Manufacturer: Compomotive	Bolt Pattern / Drilling: 3¾" (95.25mm)
	Size Data: 5½j x 13"	Backspace / Offset: Unknown / Unknown
	Weight: Unknown	Material: Alloy
	First Production Date: Unknown	In Production: Nope
	Notes: Another wheel spotted on eBay by Jon Morton. If anyone has anymore info please pass it on, cheers.
#27  Oval Hole Steels - GT6 Mk3 (late)
Click me	Manufacturer: Dunlop	Bolt Pattern / Drilling: 3¾" (95.25mm)
	Size Data: 5½j x 13"	Backspace / Offset: 94mm / 16mm
	Weight: Unknown	Material: Steel
	First Production Date: Unknown	In Production: Nope
	Notes: These were supplied on late Mk3 GT6's. Identical Spitfire mk4/1500 but 1" wider. Relatively common on eBay.
#28  Formula D?
Click me	Manufacturer: Dunlop	Bolt Pattern / Drilling: 3¾" (95.25mm)
	Size Data: 5j x 13"	Backspace / Offset: Unknown / Unknown
	Weight: Unknown	Material: Alloy
	First Production Date: Unknown	In Production: Nope
	Notes: Part of the formula D series, but not sure of the number. Anyone know?
#29  Jupiter
Click me	Manufacturer: KN	Bolt Pattern / Drilling: 3¾" (95.25mm)
	Size Data: 5.5J x 13"	Backspace / Offset: Unknown / Unknown
	Weight: Unknown	Material: Alloy
	First Production Date: Unknown	In Production: Very unlikely
	Notes: KN say these wheels are from the early 70's, and are called Jupiter. You'll notice that they have same overall shape as item #15 in this database.
#30  Interstate
Click me	Manufacturer: 100+	Bolt Pattern / Drilling: 3¾" (95.25mm)
	Size Data: 5.5J x 13"	Backspace / Offset: 108mm / 24mm
	Weight: Unknown	Material: Alloy
	First Production Date: Unknown	In Production: Nope
	Notes: According to the manufacturer these rims were usually supplied blank and therefore we're drilled in many different bolt patterns for many different cars. Most examples are painted alloy. This example has been detailed in black enamel with polished spokes.